Installation; Where And How To Mount Your Mobile Cb Radio - CRT S 8040 Owner's Manual

INSTALLATION

Where And How To Mount Your Mobile CB Radio

A) You should choose the most appropriate setting from a simple and practical point of
view.
B) Your CB radio should not interfere with the driver or the passengers.
C) Remember to provide different wires for the passing and protection (e.g.: power,
antenna, accessory cabling) so that they do not in any way interfere with the driving of
vehicles.
A) To install your equipment, use the cradle (H) and the self-tapping screws (E) provided
(drilling diameter 4 mm). Take care not to damage the vehicle's electrical system while
drilling the dash board.
E) Do not forget to insert the rubber joints (G) between the CB and its support as these
have a shock-absorbing effect which permits gentle orientation and tightening of the
set.
F) Choose where to place the microphone support and remember that the microphone
cord must stretch to the driver without interfering with the controls of the vehicle.
G) As the transceiver has a frontal microphone socket, it can be set into the dash board.
You will need to add external loud speaker to improve the sound quality of communi -
cations(connector ext. SP situated on the back panel (D).
Ask your dealer for advice on mounting your CB radio.
E
E
H
F
G
E
E
D
B
C
H
F
G
4