mercor mcr WIP LD Operation And Maintenance Manual

mercor mcr WIP LD Operation And Maintenance Manual

Smoke control dampers

Advertisement

Quick Links

ul. Grzegorza z Sanoka 2
80-408 Gdańsk
tel. (58) 341 42 45
tel./fax (58) 341 39 85
OPERATION AND
MAINTENANCE MANUAL
(OMM)
Smoke control dampers
mcr WIP LD
Version mcr WIP LD 22.03.08.1
FIRE VENTLIATION SYSTEMS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mcr WIP LD and is the answer not in the manual?

Questions and answers

Summary of Contents for mercor mcr WIP LD

  • Page 1 Grzegorza z Sanoka 2 80-408 Gdańsk tel. (58) 341 42 45 tel./fax (58) 341 39 85 OPERATION AND MAINTENANCE MANUAL (OMM) Smoke control dampers mcr WIP LD Version mcr WIP LD 22.03.08.1 FIRE VENTLIATION SYSTEMS...
  • Page 2: Table Of Contents

    All previous issues of this Technical Manual expire on the date of issue hereof. The Technical Manual does not apply to the fire dampers manufactured before its date of issue. „MERCOR” S.A. 2/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 3: Introduction

    The exception are the dampers, the height of which ends with a dimension in the range of 36-54, e.g. 136- 154, 236-254. The maximum area of the mcr WIP LD dampers is: 2.53 m2. The minimum area of the dampers is 0.18 m2.
  • Page 4: Design And Operating Principle

    The following trigger control gears are available for the mcr WIP LD dampers: Electric actuator: BEE 230 BEE 24 (-ST) BEN 230 BEN 24 (-ST) BE 230 BE 24 (-ST) „MERCOR” S.A. 4/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 5 Anchor holes O4 every 150mm around the casing B+85 B+115 embedded with a flange to the face of the wall „MERCOR” S.A. 5/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 6: Device Assembly

    150 [mm] The mcr WIP LD dampers can also be installed in partitions with a lower fire resistance class. In the case of such installation, the fire dampers have the fire resistance equal to the fire resistance of the partition, while maintaining the smoke tightness criterion.
  • Page 7: Embedding / Fixing The Damper

    Preparation of the installation opening. 6.3. EMBEDDING / FIXING THE DAMPER 1. Damper mcr WIP LD 2. Wooden blocks Protecting the damper against buckling. „MERCOR” S.A. 7/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 8 WIP LD Multi-blade smoke control dampers The mcr WIP LD damper will work properly if the isolation partition rotation axis is horizontal. The trigger control gear may be located on the right or on the left hand side of the damper at any direction of air flow.
  • Page 9 4. Masking grille MWS (opiton) Shaft space Damper installation in solid walls with a multi-compartment horizontal ducts and grille. „MERCOR” S.A. 9/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 10 4. Masking grille MWS (opiton) Shaft space Damper installation in solid walls with a single-compartment horizontal ducts and grille. „MERCOR” S.A. 10/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 11 WIP LD Multi-blade smoke control dampers 1. Mounting bracket 2. Fixing screw „MERCOR” S.A. 11/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 12: Electrical Connection

    Open isolation partition – actuator indication: 0 - Belimo serii BEE Closed isolation partition – actuator indication: 90 - Belimo serii BEN „MERCOR” S.A. 12/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 13 3x0,75 mm2 3x0,75 mm2 3x0,75 mm2 3x0,75 mm2 - auxiliary circuit 6x0,75 mm2 6x0,75 mm2 6x0,75 mm2 6x0,75 mm2 breaker „MERCOR” S.A. 13/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 14: Transport & Storage Conditions

    Damper transport may take place using any means of transport, provided they are protected against weather factors. Dampers placed on means of transport „MERCOR” S.A. 14/16 – The company reserves the right to modify and change the document.. Version: mcr WIP LD 22.03.15.1...
  • Page 15: Maintenance And Servicing

    Refer all matters related to technical inspection, maintenance and servicing of this equipment to the Mercor SA Service Department, serwis@mercor.com.pl, tel. +48 58 341 42 45 ext. 170, fax: +48 58 341 39 85, from 8 AM to 4 PM (Mo-Fri).
  • Page 16 WIP LD Multi-blade smoke control dampers “MERCOR” SA has the right to extend the time of repair if the defect removal is complicated or requires purchase of custom components or spare parts. The warranty liability only covers all defects arising from causes present in the equipment at the date of sale.

Table of Contents