Davey SILENSOR PRO SP200BTP Installation And Operating Instructions Manual page 10

Prior to using this pump you must ensure that:
• Speed (including priming and backwash) setting chosen is a compatible
setting with other pool equipment
• The pump is installed in a safe and dry environment
• The pump enclosure has adequate drainage in the event of leakage
• Any transport plugs are removed
• The pipe-work is correctly sealed and supported
• The pump is filled with water to the inlet
• The power supply is correctly connected
• All steps have been taken for safe operation
• The filter has been plumbed with 1½" (40mm) / 2" (50mm) pipe
• The (App) schedule settings correspond with any other times in the system c
10
Checklist
c
c
c
c
c
c
c
c
c