Advertisement
Quick Links
SP500 Spa Pool Controllers
CAUTION:
In the interest of safety, we advise that all brands and types of pool pumps
must be installed in accordance with AS/NZS 3000, known as the national wiring rules,
or equivalent local standards. All electrical installations must be carried out by a qualified
electrician. Davey recommends that all installations are fitted with earth leakage, or
residual current protection devices. Rated residual operating current not exceeding 30mA.
WARNING:
This appliance is not intended for use by young children or infirm persons
without supervision. Young children should be supervised to ensure they do not play with
the appliance.
WARNING:
The product must be covered by an enclosure having a degree of protection to
IP24 or better to prevent water ingress. If the supply cord is damaged, it must be replaced by
Davey, a Davey service agent, or a similarly qualified person in order to avoid a hazard.
User Guide
Advertisement
Related Manuals for Davey SpaPower SP500
Summary of Contents for Davey SpaPower SP500
- Page 1 The product must be covered by an enclosure having a degree of protection to IP24 or better to prevent water ingress. If the supply cord is damaged, it must be replaced by Davey, a Davey service agent, or a similarly qualified person in order to avoid a hazard.
-
Page 2: Temperature Control
CONGRATULATIONS Congratulations on choosing the latest SpaPOWER 500A Mk2 control system. This controller makes use of the latest technology, including innovative optical & digital sensor designs. The user friendly touchpad & reliable components provide you with the best value controller in its class. TEMPERATURE CONTROL The SpaPOWER 500A Mk2 automatically controls the pump &... -
Page 3: Pump Operation
PUMP OPERATION The default state is Auto Mode in which the pump & heater are controlled automatically to filter the water & maintain the desired water temperature. The Pump Button allows the user to control the water pump manually as desired when using the pool. Pump Push 1 - Pump ON (Heater automatic) - Page 4 AUTO SANITISING (FILTRATION) The Spa Power 500A Mk2 automatically maintains the filtration/sanitation of the spa pool water. The minimum amount of filtration time is programmable by the user & can be adjusted between 0 & 15 minutes per hour (0 to 6 hours per day). In order to maintain correct filtration of the pool water, the SP500A Mk2 monitors the time for which the pump runs in normal pool operation.
- Page 5 WARNING: This product must be covered by an enclosure to prevent water ingress. If the supply cord is damaged, it must be replaced by Davey, a Davey service agent, or a similarly qualified person in order to avoid a hazard.
-
Page 6: Self-Diagnostic Error Codes
SELF-DIAGNOSTIC ERROR CODES The Spa Power 500A Mk2 controller has extensive self diagnostic capabilities. In the event of a problem it will indicate an error number according to the nature of the problem. The error numbers & their meanings are listed below. Note: When in an error state the alarm can be muted by pushing the AIR/AUX button. - Page 7 SPA WATER TREATMENT Recommended Chemical Values Chlorine......1.5 - 3.0 PPM (Parts Per Million) pH........7.4 - 7.6 Total alkalinity....100 - 120 PPM It is important to maintain your spa water chemistry to the above values to ensure a healthy experience both for you as bathers &...
- Page 8 To the fullest extent permitted by law Davey disclaims any warranties regarding the accuracy, completeness or reliability of App data. Davey is not responsible for any direct or indirect loss, damage or costs to the User arising from its reliance on internet connectivity.