General System Maintenance; Enabling Or Disabling A Port - Comdial DX-80 Manual

DX-80 H
7. To change the routing structure, press 2. The system voices the prompt, "For digits zero
through nine, please enter the digit, or press * for special routing options."
8. Press the digit for which you want to modify the call routing. The system voices a
prompt identifying the current call routing set up for the digit.
9. When prompted, press 1 to change the routing for the digit. Then, when prompted, enter
the number of the box to which you now want callers who press the digit to route. The
system voices a prompt stating the new call routing structure.
Note that you can make special call routing refinements by pressing * in step 8 above.
The system voices the following special routing options:
To Change the Destination for the Star Digit
To Change the Destination for the Pound Digit
To Change the No Digits Destination
To Change the Invalid Digit Destination
To Change the Voice Detected Destination
Once you access this menu, be advised that you must not press # to exit it, since the # key
invokes a change to the destination for the pound key. If you want to return to the
previous menu, simply make no entry when you hear the special routing options prompt.

3.3 General System Maintenance

3.3.1 Enabling or Disabling a Port

1. From a telephone, call into voice mail and log into the supervisor mailbox 70. The
system voices the Main menu:
D V M I
ARD RIVE OICE AIL
To Change the Greeting Press 1
To Change the Routing
To Exit
S
NSTALLATION AND UPERVISOR
Press 2
Press #
97
G 09/01
UIDE
Press *
Press #
Press 1
Press 2
Press 3