Installing The Media-Card Reader - Dell Inspiron 27 7710 All-in-One Service Manual

Steps
1. Remove the screw (M3x3.5) that secure the media-card reader to the display-assembly base.
2. Open the latch and disconnect the media-card reader cable from the system board.
3. Gently slide and remove the media-card reader, along with its cable, from the media-card reader slot.

Installing the media-card reader

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the media-card reader and provides a visual representation of the installation
procedure.
44 Removing and installing components