Stand; Removing The Stand - Dell Inspiron 27 7710 All-in-One Service Manual

Hide thumbs Also See for Inspiron 27 7710 All-in-One:

Table of Contents

25. Retractable camera assembly

Dell provides a list of components and their part numbers for the original system configuration purchased. These parts are

available according to warranty coverages purchased by the customer. Contact your Dell sales representative for purchase

options.

Stand

Prerequisites

1. Follow the procedure in

CAUTION:

When servicing the computer, place it on an elevated, clean, and flat surface. Place the display

flat on the surface with the stand hanging over the edge. It is recommended to remove the stand to avoid

accidental damage to the computer display during servicing.

NOTE:

The following procedure is applicable for both Y stand and Isosceles stand.

NOTE:

For replacement of stand or hinges, the replacement kit is shipped with both stand and hinges, and the service

technician must replace both of these components together. Please refer to the procedure for

installing the

hinges.

About this task

The following image indicates the location of the stand and provides a visual representation of the removal procedure.

Before working inside your

computer.

Removing and installing components

removing the hinges

and

Table of Contents

W28c