Display Hinges; Removing The Display Hinges - Dell Inspiron 27 7710 All-in-One Service Manual

Steps
1. Align the screw holes on the I/O cover with the screw holes on the display-assembly base and snap the I/O cover back into
place.
2. Replace the five screws (M3x5) that secure the I/O cover to the display-assembly base.
Next steps
1. Install the back cover.
2. Install the stand.
3. Follow the procedure in

Display hinges

Removing the display hinges

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
NOTE:
For replacement of stand or hinges, the replacement kit is shipped with both stand and hinges, and the service technician
must replace both of these components together. For more information about removing or installing the stand, see
removing the stand and
About this task
The following image indicates the location of the hinges and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
installing the stand.
computer.
computer.
Removing and installing components 19