Sending Multicast Paging; Setting A Multicast Paging Key; Sending A Paging By A Multicast Paging Key - Yealink CP925 User Manual

Sending Multicast Paging

Receiving Multicast Paging
Managing a Paging Call
Sending Multicast Paging
Your phone supports up to 31 groups for paging. You can assign a label to each group to identify the phones in the
group, such as All, Sales, or HR.
Note : Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For outgoing RTP multicasts,
all other existing calls on the phone will be placed on hold.
Topics

Setting a Multicast Paging Key

Sending a Paging by a Multicast Paging Key

Setting a Paging List Key
Setting a Paging Group
Sending Pages by a Paging List Key
Deleting a Paging Group
Setting a Multicast Paging Key
You can set a Multicast Paging key for a paging group, which allows you to send announcements quickly on the
idle screen.
Before You Begin
Get the multicast IP address and port number from your system administrator.
Procedure
1. 1. Tap Dsskey.
2. Long tap the desired line key.
3. Select Key Event from the Type field.
4. Select Multicast Paging (Paging) from the Key Type field.
5. (Optional.) Enter the paging group name in the Label field.
6. Enter the multicast IP address and port number (for example, 224.5.6.20:10008) in the Value field.
7. Enter the desired channel between 0 and 30 in the Channel field.
8. Select .
Sending a Paging by a Multicast Paging Key
You can send a paging by using the Multicast Paging key when the phone is idle.
Before You Begin
You need to set a Multicast Paging key in advance.
Procedure
1. Tap the Multicast Paging key when the phone is idle.
Both your phone and receiver's phone play a warning tone and the multicast RTP session will be automatically
answered on the receiver's phone in the speakerphone (hands-free) mode.
Mute key LED indicators glow green.
The following figure shows a multicast RTP session on the phone:
Call Features
33