System Board; Removing The System Board - Dell Inspiron 14 7425 2-in-1 Service Manual

Steps
1. Align and place the power-button, along with the fingerprint-reader cable, on the slot of the palm-rest and keyboard
assembly.
2. Align the screw holes on the power-button with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x3) that secure power-button to the palm-rest and keyboard assembly.
4. Connect the fingerprint-reader cable to the palm-rest and keyboard assembly.
Next steps
1. Install the I/O board.
2. Install the display assembly.
3. Install the fan.
4. Install the heat sink.
5. Install the base cover.
6. Follow the procedure in

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the memory.
5. Remove the wireless card.
6. Remove the M.2 2230 solid-state drive
7. Remove the heat sink.
8. Remove the fan.
44 Removing and installing components
After working inside your
Before working inside your
or M.2 2280 solid-state
computer.
computer.
drive, whichever applicable.