Advertisement
Scope: to create a system only with Key-Block mode transmitters
Steps to follow:
- insert the AF43TW frequency card into all the automation devices.
- insert the password in one TWIN transmitter as per pag. 4-5.
- memorise the new encoding on the receivers of the automation with the new AF43TW card
(see relative instructions).
- duplicate the TWIN transmitters in Key-Block mode as per pag. 6-7.
In this way, anybody needing a copy of the TWIN transmitter to command the automation
device, will have to address the installer or dealer that has the password.
www.metalines.com
12
Example 3:
NEW INSTALLATION
sales@metalines.com
Advertisement
