Replacing The Battery Of The Enforcer Homecontrol+ Panel; 50131 Terminology; Access Levels - Pyronix HomeControl+ Installation & Reference Manual

5.7 Replacing The Battery of the Enforcer HomeControl+ Panel

To ensure meeting the specification of the HomeControl+ Panel, the backup battery should be replaced with the
correct Pyronix battery. The part code for this battery is BATT9V6/2.1Ah-WE.
Open the battery holder cover. Install the battery
module in the spaces provided and connect the
battery connector to the two pins (as shown in
the diagram on the right).
Reinstall the battery
holder/cover.
Dispose of the batteries in
accordance with the local
regulations.
6. EN 50131 Terminology
Enforcer HomeControl+
Panel Language
Set
Unset
Day or Unset Mode
Hold Up (HU)
Omit
Unused
Siren / External Sounder / SAB
Internal Sounder / Speaker
Prox card, Tag, or wireless
keyfob

7. Access Levels

Level 1: Access by any person; such as the general public.
Level 2: User access by an operator; such as customers (systems users).
Level 3: User access by an engineer; such as an alarm company professional.
Level 4: User access by the manufacturer of the equipment.
The battery is NiMH 8
cell 2200mAh
rechargable battery
only use the genuine
replacement
EN50131 Language
Set
Unset
Unset State (may be relevant to a specific area)
Hold Up (HU)
Inhibit
Isolated
External Warning Device (self-powered is assumed)
Device combining internal warning device with audible
indicator (using different tones and volumes)
Digital Key
Page: 19