Lifting The Machine; Operating Tips - Toro STX-38 Operator's Manual

1. Front tie-down loop
1. Rear tie-down loops

Lifting the Machine

You can lift the machine using the tie-down/lift loops as lift
points (Figure 22 and Figure 23).

Operating Tips

•
Clean the area of trash, branches and rocks before
operating to prevent equipment damage.
Figure 22
Figure 23
•
Always use full throttle (maximum engine speed) when
grinding.
•
Cut the edges of the stump for more efficient grinding.
Once your cutting swath is close to 1/4 of the wheel
diameter (Figure 21), lift the grinder, move forward and
begin cutting on the edge again.
19