Toro STX-38 Operator's Manual page 13

•
To turn left, rotate the traction control counterclockwise
(Figure 12).
Figure 12
•
To stop, release the traction control (Figure 8).
Note: The farther you move the traction control in any
direction, the faster the machine will move in that direction.
Grinder Control Lever
Operate the grinder using the grinder control lever as follows:
•
To start the grinder (Figure 13), press the red button on
the top of the lever, then squeeze the trigger. Once the
grinder has started, you can release the red button.
•
To stop the grinder (Figure 13), release the trigger for
more than a half second.
Note: If you are operating the grinder and momentarily
release the trigger (i.e., less than a half second) the grinder
will continue operation.
G008131
Figure 11
G008132
1. Neutral
2. Start the grinder
•
To raise the grinder, pull back on the lever (Figure 14).
13
Figure 13
3. Run the grinder
4. Stop the grinder