Royal Enfield HIMALAYAN EURO IV 2017 Service Manual page 70

S.
Aggregate to Assemble/
No.
Instructions
8.2 P P ulse air valve on
frame
Locate pulse air valve in
the frame such that the
outlet is facing down, the
inlet from Throttle body
is on the RH side and the
inlet from air filter is on
the Left side of the frame
Ensure the dampers and
spacers are in place in
the mounting locations
and tighten with 2 hex
flange bolts M6X30
Apply grease on the
gasket and locate it on
the cylinder head
Locate worm clip on the
braided hose
assemble braided hose
on the outlet tube of the
pulse air valve
Position braided hose
flange over the gasket on
cylinder head , align the
holes and tighten with
two hex socket head cap
screws
Tighten worm clip over
the braided hose.
Connect the rubber
hoses from airfilter and
inlet manifold
respectively and slide
the clips in place.
Fastener, Size, Tool Usage, Precautions, Photos
Flanged Hex Bolts: M6
Socket spanner: 8mm
Torque:10-12Nm
(1.0-1.2 Kg.M)
Screw driver
and
Hex soc hd cap screws:
M6X20
Allen key: M5
Torque:10-12Nm
(1.0-1.2 Kg.M)
ROYAL ENFIELD HIMALAYAN EURO IV VEHICLE SERVICE MANUAL
69