Drag & Drop Links - Royal Enfield HIMALAYAN EURO IV 2017 Service Manual

S.
Aggregate to Assemble/
No.
Instructions
Drag & Drop Links
12.9
Locate larger end of
drop link with inner race
and dust seal in place in
swing arm and assemble
hex bolt.
Assemble flange U nut
and tighten to torque
Repeat above process to
assemble second drop
link in swing arm.
Ensure free movement
of both drop links.
Ensure the drag link is
positioned such that the
longer side is facing
towards the mounting
hole in frame.
Position drop links with
dust seals on either side
of the drag link, ensure
the holes are aligned and
insert inner race - drag
link back, through the
drop link till it is flush on
either sides of the drop
links.
Assemble long hex bolt
and hex nut. D D O NOT
TIGHTEN
Support swing arm and
position drag link with
inner race – drag link
front and dust seals in
the mounting bracket in
frame, ensure holes are
aligned and insert hex
bolt to lock drag link to
frame.
Assemble hex nut on
bolt.
Tighten all fasteners of
drag and drop links to
torque.
Ensure free movement
of swing arm, drag and
drop links.
122
ROYAL ENFIELD HIMALAYAN EURO IV VEHICLE SERVICE MANUAL
Fastener, Size, Tool Usage, Precautions, Photos
NOTE:
Ensure the needle bearings
and inner races are greased
well before assembly.
Hex nut: M10
Hex bolt M10
socket spanner:17mm
Ring spanner: 14mm
Torque: 50Nm(5 KgM)
Hex nut: M10
Hex bolt M10
socket spanner:17mm
Ring spanner: 14mm
Torque: 50Nm(5 KgM)