Royal Enfield HIMALAYAN EURO IV 2017 Service Manual page 126

S.
Aggregate to Assemble/
No.
Instructions
S S aree & Chain
12.14
guards
Position chain guard on
swign arm top and saree
gurad over the chain
guard
Assemble 2 hex socket
head cap screws at the
top and 1 hex socket
head cap screw at the
bottom of saree guard.
Tighten all fasteners
diagonally and evenly to
torque.
Rear Wheel Chain &
12.15
Sprocket Assembly
Ensure proper seating
of bearing and dust seal
in adaptor
Locate rear
sprocket on the adaptor.
Ensure the 6 mounting
holes are aligned
Locate six hex socket
head cap screws from
the sprocket end.
Assemble 6 Nylock nuts
on the screws at the
adaptor end.
Tighten the 6 bolts
diagonally and evenly to
torque following the
sequence shown.
Fastener, Size, Tool Usage, Precautions, Photos
Hex soc hd. cap screws: M6
Allen Key: 5mm
Torque:
NOTE:
Apply Loctite 270 on the
Allen screws
wheel
assembling nuts.
Allen screw: M10
Allen key: M8
Hex nut: M10
Ring spanner: 12mm
Torque: 50Nm (5Kg.M)
ROYAL ENFIELD
before
HIMALAYAN EURO IV VEHICLE SERVICE MANUAL
Tightening Sequence
A-B-C-D-E-F
125