Panasonic PT-53X54J Service Manual page 71

6. In "EASY" mode, the adjustment value changes by 4 steps
7. "EASY" mode allows to move lines horizontally and vertically from
the center of cursor
8. This mode affects a wide area around the cursor than other
adjustment modes, See values on screen by pressing RECALL on
remote
9. Begin adjustment from the center to the edge of the screen.
10. Adjust when the cursor is not flashing by pressing CH up/down
and VOL right/left on the remote control, if the cursor is flashing
press MUTE on remote.
11. To move the cursor press MUTE on the remote (cursor flashes),
then move the cursor to any of the positions for "EASY" mode
12. This adjustment may help to make rounded lines become straight
lines.
13. Adjust to make lines as straight as possible.
"EASY" mode adjustment, possible locations for cursor
"EASY" mode adjustment
71