Panasonic PT-53X54J Service Manual page 64

NOTE:
It is strongly recommended to first read and understand the following section prior to make any
adjustment. / Convergence adjustment must be performed for 480i_p (same for interlace &
progressive), ZOOM 480i and 1080i.
Procedure:
1. Enter to "G-SIZE" mode:
- Select "COARSE" DAC
- Press ACTION on remote
- TV/VIDEO (repeatedly)
- R-TUNE (repeatedly)
2. Press "2" repeatedly and apply the pattern of border and cross.
3. Press "RECALL" key to display values
4. Adjust size so that the line of the border closes to the screen
frame at top, bottom, left and right, by pressing CH up-down and
VOL right-left
5. Press "7" then "ACTION" key on remote to save changes.
6. Enter to linearity "G-LINEAR" mode by pressing "TV/VIDEO".
7. Adjust linearity by pressing VOL right-left until A=B.
"SIZE" mode adjustment
"LINEAR" mode adjustment
64