Panasonic PT-53X54J Service Manual page 66

17. Adjust by pressing CH up-down (see figure)
18. Press "7" then "ACTION" key on remote to save changes
NOTE:
Confirm that pattern looks like a square and almost overlaps the screen frame, check that
vertical and horizontal line center match with the marks on screen frame, if linearity is not good
enough, repeat adjustments.
19. Enter to "STATIC" mode by pressing TV/VIDEO.
20. Press "1" or "3" repeatedly until green and red only are shown.
21. Adjust "R-STATIC" so that the center of red overlaps with the
center of green
22. Enter to SKEW "R-SKEW" mode by pressing TV/VIDEO
23. Adjust "R-SKEW" so that the vertical and horizontal line of center
overlaps with green (see figure)
24. Press "7" then "ACTION" key on remote to save changes.
"KEY" mode adjustment
"STATIC" mode adjustment
"SKEW" mode adjustment
66