Panasonic PT-53X54J Service Manual page 67

NOTE:
Remember always save data following each adjustment by pressing "7" key on remote, then
ACTION.
25. Enter to LINEARITY "R-LINEAR" mode by pressing TV/VIDEO.
26. Adjust Horizontal linearity (see figure)
27. Enter to SIZE "R-SIZE" mode by pressing TV/VIDEO.
28. Adjust so that the line on the border closes to the screen frame at
top, bottom, left and right (see figure).
29. Enter to PIN "R-PIN" mode by pressing TV/VIDEO
30. Adjust horizontally and vertically (see figure)
31. Enter to CORNER "R-CORNER" mode by pressing TV/VIDEO.
32. Adjust corners (see figure).
33. Enter to KEY "R-KEY" mode by pressing TV/VIDEO
34. Adjust KEY (see figure).
35. Display pattern of border and cross, then check that red overlaps
green pattern, if it is not satisfactory, repeat from step 19.
36. Enter to STATIC "B-STATIC" mode.
37. Press "1 or 3" key repeatedly on remote until only green and blue
pattern are displayed.
38. Adjust B-STATIC so that the center of blue overlaps with the
center of green (see figure).
"B-STATIC" mode adjustment
67