Panasonic PT-53X54J Service Manual page 43

16. CRT Set Up
CAUTION:
Insure that yoke plugs are reconnected on D-Board before turning
the PTV ON to prevent damage to the horizontal output transistor
and/or CRTs.
1. Connect test generator to the antenna terminal and set for a
monoscope pattern.
2. Loosen yoke clamp, seat yoke against bell of CRT and rotate to
correct yoke tilt (compare to adjacent CRT). Tighten yoke clamp.
3. Remove adhesive from centering tabs and set centering tabs for
zero correction.
Adhesive removal
43