NetApp AFF A200 Manual page 10

a. Enter the onboard security key-manager sync command:
sync
If the command fails, contact NetApp Support.
mysupport.netapp.com
b. Verify that the
manager key-query
c. You can safely shut down the controller.
3. If the
Key Manager
yes:
a. Enter the onboard security key-manager sync command:
sync
Enter the customer's onboard key management passphrase at the prompt. If the passphrase
cannot be provided, contact NetApp Support.
mysupport.netapp.com
b. Verify the
Restored
key-query
c. Verify that the
information.
d. Go to advanced privilege mode and enter
e. Enter the command to display the key management backup information:
manager onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You'll need it in
disaster scenarios where you might need to manually recover OKM.
g. Return to admin mode:
h. You can safely shut down the controller.
Shut down the impaired controller - AFF A200
After completing the NVE or NSE tasks, you need to complete the shutdown of the
impaired controller.
Steps
a. Take the impaired controller to the LOADER prompt:
If the impaired controller
displays...
The LOADER prompt
Waiting for giveback...
8
column equals
Restored
type displays
onboard
column shows
yes
type shows onboard, and then manually back up the OKM
Key Manager
set -priv admin
Then...
Go to Remove controller module.
Press Ctrl-C, and then respond
security key-manager external
for all authentication keys:
yes
and the column displays anything other than
Restored
security key-manager onboard
for all authentication keys:
when prompted to continue:
y
when prompted.
y
security key-
security key-manager
set -priv advanced
security key-