Changing The Batteries - Datalogic PowerScan Area Imager Quick Reference Manual

Changing the Batteries

CHANGING THE BATTERIES
1. Push in and slide the battery lock down to open the
battery door, as shown below.
2. Open the battery door and extract the battery.
3. Invert the sequence to insert the battery and lock the
battery door.
WARNING: Do not incinerate, disassemble, short
terminals or expose to high temperature. Risk of
fire, explosion. Use specified charger only. Risk of
explosion if the battery is replaced by an incorrect
type. Dispose of the batteries as required by the
relevant laws in force.
28
POWERSCAN™ PM96XX