Table of Contents
Advertisement
a label does not disable scanning. Double Read Timeout
prevents undesired multiple reads while in this mode.
Always On —
is always ready for code reading. Double Read Timeout
prevents undesired multiple reads.
Flashing —
regardless of the trigger status. Code reading takes place
only during the Flash On
prevents undesired multiple reads.
Stand Mode —
field-of-view. The Aiming Pattern is always on to show the
optimum reading area. If a predefined amount of move-
ment is detected, the white illumination switches on.
Scanning continues until a label is read or "Scanning Active
Time" is reached.
Retained Trigger Hold Multiple —
Multiple but all decoded labels are transmitted when the
trigger is released. The labels can be sorted before trans-
mission.
★ = default value
1.
Controlled by Flash On Time and Flash Off Time. Use the PRG to
program these options.
The illuminator is always ON and the reader
The reader illuminator flashes on and off
The scanner looks for changes within its
SCAN MODE
ENTER/EXIT PROGRAMMING MODE
★ Scan Mode = Trigger Single
1
time. Double Read Timeout
Same as Trigger Hold
QUICK REFERENCE GUIDE
Operating Modes
15
1
1
1
Advertisement
Table of Contents
