Noise Pollution; Safety Instructions Relating To Operation; Safety Notes For Rechargeable Battery And Charger; Assembly - AL-KO Solo GT 4235.2 Instructions For Use Manual

GB
the fingers, hands or pulse. The risk increas-
es at low temperatures.
■
Take long breaks during your working day so
you can recover from the noise and the vibra-
tions. Plan your work in such a way that the
use of appliances that generate strong vibra-
tions is spread over several days.
■
If you notice an unpleasant sensation or disc-
olouration of the skin on your hands when us-
ing the tool, stop work immediately. Take suf-
ficient work breaks. Without sufficient breaks,
a hand/arm vibration syndrome can occur.
■
Minimise your risk of being exposed to vibra-
tions. Maintain the tool according to the in-
structions in the operating instructions.
■
If the tool is used frequently, contact your
dealer to purchase anti-vibration accessories
(e.g. handles).
■
Avoid working with the tool at temperatures
below 10 °C. Define how the vibration load
can be limited in a work plan.
6.8

Noise pollution

A certain level of noise exposure from this appli-
ance is inevitable. Carry out noisy work at ap-
proved and specified time periods. Observe rest
periods as necessary and restrict the duration of
the work to a minimum. For your personal protec-
tion and protection of persons in the vicinity, ap-
propriate hearing protection must be worn.
6.9

Safety instructions relating to operation

WARNING! Risk due to electromagnetic
field. This power tool produces an electromag-
netic field during operation. Under certain circum-
stances, this field may impair active or passive
medical implants.
■
In order to reduce the risk of serious or fatal
injury, we recommend that any persons fitted
with medical implants should consult their
doctor and the manufacturer of the medical
implant before operating the power tool.
■
Always operate the machine with two hands.
■
Always keep hand and feet away from the
cutting device, above all when switching on
the motor.
■
Wait for the cutting device to come to a
standstill after the motor has been switched
off.
■
Only remove cuttings when the motor and
cutting device are at a standstill.
30
■
Because of danger of cutting injuries, do not
touch the line cutter with unprotected hands.
■
After pulling out a new line, always bring the
appliance into its normal working position be-
fore switching it on.
■
Do not use a metallic cutting line.
■
Always keep the guard plate, spool head and
motor clear of mowing residues.
■
People who are not familiar with the appli-
ance should practice handling it while the
motor is turned off.
■
When working on a slope:
■
Never work on a smooth and slippery
slope.
■
Always mow across the slope, never
down or up.
■
Always stand below the cutting device.
■
After contact with a foreign object:
■
Switch off the engine.
■
Check the machine for damage.
■
Attach the blade so that it does not loosen
and fall during operation.
6.10 Safety notes for rechargeable battery
and charger
Heed the safety instructions for the rechargeable
battery and for the charging unit in the separate
operating instructions.
See:
■
Operating instructions 441630: Li-ion re-
chargeable battery B150 Li (B05-3640G),
B200 Li (B05-3650G)
■
Operating instructions 441633: charger
C130 Li (C05-4230)

7 ASSEMBLY

WARNING! Danger if assembly is not
carried out completely! Use of an incompletely
assembled device can result in serious injury.
■
Only use the device when it is fully assem-
bled!
■
Before switching on, check that all safety and
protective devices are in place and function-
ing correctly!
WARNING! Risk of injury due to detach-
ing appliance parts. Appliance parts detaching
during operation can lead to serious injury.
■
Attach the cutting tools so that they cannot
come loose during operation.
Assembly
GT 4235.2