Lighting; Lighting Control; Direction Indicators - Ford EXPLORER Supplemental Owner's Manual

LIGHTING CONTROL

Lighting Control Selections
E281337
Turn the dial to make a selection.
Note: The indicator illuminates next to the
active selection.
Lamps off.
E265031
Parking lamps, instrument panel
lamps, license plate lamps and
rear lamps.
Autolamps.
E281240
Headlamps on.
E270968
Note: The lighting control defaults to
autolamps every time you switch your
vehicle on.
Switching High Beam Headlamps
On and Off
E248603
Explorer (CTW) Vehicles Built From: 27-09-2021, CG3954en enGBR, Edition date: 202107, First-Printing

Lighting

Push the lever away from you to
switch the high beam on.
Push the lever forward again or pull the
lever toward you to switch the high beams
off.
Flashing High Beam Headlamps
E248604
Pull the lever toward you and release it to
flash the high beam headlamps.

DIRECTION INDICATORS

Switching the Direction Indicators
On and Off
E242676
Push the lever up or down to switch the
direction indicators on.
Note: Tap the lever up or down to make the
direction indicators flash three times.
32