Ford EXPLORER Supplemental Owner's Manual page 31

WARNING: If the battery
compartment does not securely close,
stop using the remote control and
replace it as soon as possible. In the
meantime, keep the remote control away
from children. Failure to follow this
instruction could result in personal injury
or death.
Note: Refer to local regulations when
disposing of remote control batteries.
Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
Note: Replacing the battery does not erase
the programmed key from your vehicle. The
remote control should operate normally.
A message appears in the information
display when the battery is low.
The remote control uses one coin-type
three-volt lithium battery.
E311051
1. Push the release button and pull the
key blade out.
Explorer (CTW) Vehicles Built From: 27-09-2021, CG3954en enGBR, Edition date: 202107, First-Printing
Keys and Remote Controls
2. Twist a thin coin under the tab hidden
behind the key blade head to remove
the battery cover.
28