Ford EXPLORER Supplemental Owner's Manual page 96

E307859
13. Place the jack at the jacking point
next to the tire which you are
changing. Turn the lug wrench handle
clockwise until the flat tire is
completely off the ground.
E201156
14. Remove the lug nuts with the lug
wrench.
15. Replace the flat tire with the spare
tire, making sure the valve stem is
facing outward.
16. Install the lug nuts snug against the
hub. Do not fully tighten the lug nuts
until the vehicle is lowered.
17. Turn the wrench handle
counterclockwise to lower the vehicle
completely.
Explorer (CTW) Vehicles Built From: 27-09-2021, CG3954en enGBR, Edition date: 202107, First-Printing
Wheels and Tires
E306781
18.
19.
20. Remove the wheel blocks.
Stowing the jack
E176165
1.
2. Place the jack in the spare tire
93
1
3
5
Remove the jack and fully tighten the
lug nuts in the order shown.
If you enabled the Air Suspension
Service Mode, switch the mode off
prior to driving.
To store the folded wrench on the jack,
engage the bracket of the jack base
and the lug wrench pin, swing the
wrench upwards, adjust jack height
until the wrench hook engages the hole
on jack. Tighten the hex nut clockwise
by hand until secure.
compartment, install the wing nut and
tighten clockwise by hand until secure.
4
2