Alienware m17 R5 AMD Service Manual page 72

Table 5. System setup options—Security menu
Security
Admin Password
System Password
Asset tag
Admin Password
System Password
Password Change
Absolute
Absolute Status
WINDOWS SMM SECURITY MITIGATIONS TABLE
(WSSMT)
Firmware TPM
PPI Bypass for Clear Command
Enable Pre-Boot DMA Support
Enable OS Kernel DMA Support
UEFI Firmware Capsule Updates
Secure Boot
Table 6. System setup options—Boot menu
Boot
File Browser Add Boot Option
Windows Boot Manager
UEFI Boot
72
Displays if the administrator password is clear or set.
Displays if the system password is clear or set.
Default: Not Set
Set your system's Asset Tag
Allows you to set the administrator password. The
administrator password controls access to the system setup
utility.
Allows you to set the system password. The system password
controls access to the computer at boot.
Allows you to permit or deny system password or HDD
password changes.
Default: Permitted
Enables or disables the BIOS module interface of the optional
Computrace Service from Absolute Software.
Default: Deactivate
Enables or disables SED Block SID Authentication.
Default: Disabled
Enables or disables WSSMT.
Default: Disabled
Enable or disable the firmware TPM.
Default: Enabled
Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip
BIOS PPI user prompts when issuing the Clear command.
Changes to this setting take effect immediately.
Default: Disabled
Enables or disables Pre-Boot DMA Support.
Default: Enabled
Enables or disables OS Kernel DMA Support.
Default: Enabled
Enables or disables BIOS updates through UEFI capsule
update packages.
Default: Enabled
Enables or disables configuration of platform features on Dell
Client Systems with WSMT-enabled BIOS.
Default: Enabled
Allows you to add the boot options.
Display boot options in Windows
Enables or disables UEFI boot.