Advertisement
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment(The network
segment of Model I, Model II is 1; and the network
segment of network port 1 of Model III and Model
IV is 1, the network segment of network port 2 is 8 ),
and the network between them can be mutually
accessed.
Step 2
Enter device's IP address in the address bar of the
computer browser.
Network Port 1:
Network Port 2:
Step 3
Enter device's username and password in the login
window as shown below.
Step 4
Click "Login" button to login to the WEB interface of
the device.
Note:
The default IP address of the network ports of model I
and model II is "192.168.1.254"; The default IP address
of network port 1 of model III and model IV is
"192.168.1.254", and the default IP address of network
port 2 is "192.168.8.254".
The default user name and password of the device are
"admin".
If the user name or password is lost, user can restore it
to factory settings via restore button or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
100M Copper Port
10/100Base-T(X)
RJ45 port
Serial Port
3IN1 RJ45 interface or 3IN1 DB9
interface with isolation
Indicator
Power
indicator, Copper port connection
indicator, Serial port transmission
and receiving data indicator
Power supply
Input power supply
12~48VDC
Access terminal block
3-pin
5.08mm
blocks
Power consumption
Model I, Model II
No-load: 0.9W@12VDC
Full-load: 1.1W@12VDC
Model III, Model IV
No-load: 3.4W@12VDC
Full-load: 4.1W@12VDC
Working Environment
Working temperature
-40～75℃
Storage temperature
-40～85℃
Working humidity
5%～95% (no condensation)
Protection grade
IP30(metal shell)
self-adapting
indicator,
Running
pitch
terminal
Advertisement
