JVC XV-521BK Service Manual page 5

Removing the fitting (See Fig.3 to 6)
Prior to performing the following procedure, remove
the top cover.
ATTENTION: To remove the front panel assembly
and the DVD mechanism assembly,
remove the fitting in advance.
by hand
1. Turn over the body. Insert a screwdriver into the hole
of the bottom chassis and turnit. The loading tray will
be ejected out of the front panel assembly.
2. Pull the loading tray toward the front.
3. Remove the fitting upward from the loading tray at
the joints b.
4. Push and return the loading tray.
Front panel
(Bottom)
Front panel assembly
Loading tray
Front panel assembly
Fitting
Joint b
Joint b
Front panel assembly
Loading tray
XV-521BK/523GD/522SL
Hole
Bottom chassis
Fig.3
Fig.4
Loading tray
Fig.5
DVD mechanism assembly
Fig.6
1-5