External Dialling; Answering Calls - Siemens Hicom cordless EM Operating Instructions Manual

Telephone functions

External dialling

External code
e.g.
Call
Ending a call
Note:
The dialled number is automatically stored for number
redial.

Answering calls

The mobile unit's ringing tone is audible. The caller's
name is displayed if the caller is an internal user. The
number or the name is displayed if the caller is an external
user (as for optiset telephones)!
The mobile unit is in the charging shell:
or
The mobile unit is not in the charging shell:
Ending a call
* Only if Auto Talk is activated – see also page 51!
Press the talk key - the user's own
mobile unit number appears in the dis-
play.
Enter the external code, e.g. "0",
when you hear the dial tone.
Dial the external number - the entered
digits are displayed.
See also Note!
Conduct the call.
Press the on-hook key or place the
mobile unit in the charging shell.
Simply remove the mobile unit from
the charging shell*.
Press the talk key.
Press the on-hook key or place the
mobile unit in the charging shell.
23