Telephone Functions; Internal Dialling - Siemens Hicom cordless EM Operating Instructions Manual

Telephone functions

Note:
You can use the menu key
to call up the short cut list and start your short cuts
when a connection is set up (while a call is in
progress).
All functions concluded with the on-hook key
can also be concluded by inserting the mobile unit
into the charging shell.
All functions can be cancelled with the on-hook
key

Internal dialling

Call
Ending a call
Note:
The dialled number is automatically stored for number
redial, see page 25.
.
Press the talk key - the user's own
mobile phone number appears in the
display.
Enter the internal number when the
you hear the dial tone – the entered
digits are displayed .
See also Note!
Conduct the call – the name or the
number of the user is displayed .
Press the on-hook key or place the
mobile unit into the charging shelf.
This display when the mobile is
on is a prerequisite and initial status
for all telephone functions (see also
"Radio range" page 9).
, or an other name may be dis-
played (see page 49) depending on
the current base (system).
or the display key
22
, , ,