ProDevice ASM120 Operating Manual page 9

menu on the workstation.
Launching the software displays the user interface screen on the workstation
monitor (Fig .4.1 ProDevice ASM120 PPMS USER software start screen).
The software will automatically attempt to connect with the device. This
process will be seen in the message "Trying to connect!" in the status line at
the bottom of the software interface. The connection test is repeated until
correct data transmission is established.
Once correct communication with the device has been established, the
software status
established!"
Fig. 4.1 The start screen of the ProDevice ASM120 USER software interface
10
Operating Manual ProDevice ASM120 PPMS USER
line displays the
www.prodevice.eu
following message: "Connection