Table of Contents
Advertisement
4.1.4.
REPORTS
The functionality of the software tool allows generating reports of the
device performance. The Administrator can generate a simplified report from
the data read from the device; they can also generate an encrypted file with
the device diagnostic data.
The report includes a list of events recorded by the device. Each event
has a defined access level which defines the users who can see the event in
the report.
THE FOLLOWING LIST PRESENTS THE EVENTS WITH THE LISTING OF
USER GROUPS WHO CAN SEE THE EVENTS IN THE REPORT:
•
Set erasable counter – the device received the command to set the
erasable counter; an additional parameter stores the new counter
value; access level: Service.
•
Set device password – the device received the command to change
the Device Password; an additional parameter stores the new
password; access level: Administrator.
•
Set blockade counter – the device received the command to change
the blockade counter; an additional parameter stores the new blockade
counter; access level: Administrator.
•
Device blockade – the device notified the user that new cycles cannot
be done (the blockade cycle counter was activated); access level:
Administrator.
•
Unathorised access attempt – the device received a command with
incorrect password authorisation; an additional parameter stores the
password which was used during the attempt; access level:
Administrator.
•
IP address reset – the device detected the IP address reset executed
with the key at the TCP/IP connector; the default IP address was
restored; access level: Customer.
•
Set IP address – the device received the command to change the IP
address; an additional parameter stores the new IP address; access
level: Customer.
16
Operating Manual ProDevice ASM120 PPMS USER
www.prodevice.eu
Advertisement
Table of Contents
