Table of Contents
Advertisement
Operating Manual ProDevice ASM120 PPMS USER
•
Date & Time – this field displays the current date and time of the
device. The user cannot directly edit this field. The current date and
time are shown in the filed area after clicking Get RTC.
This screen has the following set of function buttons:
Fig. 4.1.6.3 The Date & Time screen function button
•
Get RTC – this button displays the current date and time on the device.
The values are displayed in the Date & Time field.
The function buttons of this screen remain disabled until correct
communication is established with the device.
REMOTE CHANGE OF THE BLOCKADE – STEP BY STEP INSTRUCTIONS
If the Customer uses the preset limit of removal cycles, they should do the
following steps:
1.
In ProDevice ASM120 ADMIN, enter the PPMS BLOCKADE CHANGE
menu.
2.
Click the LOAD button.
3.
After selecting the location of the authorisation file received from the
customer, select the file and click OPEN.
4.
In the AUTHORISATION FILE field, define NEW BLOCKADE STATE
with the number of cycles needed by the customer.
5.
Click the CREATE button in the PPMS BLOCKADE CHANGE tab.
6.
When the dialogue window opens, save the generated file to disk.
7.
Send the generated file to the customer.
www.prodevice.eu
ASM120
25
Advertisement
Table of Contents
