Table of Contents
Advertisement
Operating Manual ProDevice ASM120 PPMS USER
AUTHORISATION – STEP BY STEP INSTRUCTIONS
When the preset limit of removal cycles is used, do the following steps:
1.
In ProDevice ASM120 ADMIN, enter the PPMS AUTHORISATION
menu.
2.
Click the CREATE button.
3.
After selecting the save location of the generated file, click SAVE.
4.
Send the generated file to the device Administrator with the information
about the number of required additional removal cycles.
5.
The Administrator sends a feedback with the file that contains the new
blockade setting.
6.
Click the LOAD button in the PPMS AUTHORISATION tab.
7.
Select the file sent by the Administrator and click OPEN.
8.
The removal cycle blockade is automatically changed.
Fig. 4.1.7.1 Authorisation function screen
www.prodevice.eu
ASM120
27
Advertisement
Table of Contents
