Table of Contents
Advertisement
Operating Manual ProDevice ASM120 PPMS USER
5.1.1.
ERROR MESSAGES
The software tool has a set of messages with encountered errors. The
following lists the diagnostic messages.
•
Communication establishment attempt in progress – this message
is displayed in the status line of the software interface when
communication is lost between the device and the software. When the
communication is lost, the software attempts to reconnect until correct
communication is restored.
•
Error when opening file – this message is displayed in a new
dialogue window. This means that the file has an incorrect format or
that the file is corrupt. The message can be displayed in similar
situations, e.g. during loading of the Key File to set the blockade.
•
Error when saving file – this message is displayed in a new dialogue
window. This means that the Key File saving is incorrect.
•
File decryption failed – this message is displayed in a new dialogue
window. This means that the code key used to read the file is incorrect.
The message can be displayed in similar situations, e.g. when the
Authorisation File is read.
•
File has no data – this message is displayed in a new dialogue
window. It can be displayed when the Authorisation File without any
data is read.
•
Events list cannot be empty – this message is displayed in a new
dialogue window when a report is saved without any entry on the list of
events recorded by the device.
•
The new IP will be used after reconnecting the degausser – this
message is displayed in a new dialogue window after changing the
device IP address.
www.prodevice.eu
ASM120
31
Advertisement
Table of Contents
