Related Manuals for ProDevice MSS
Summary of Contents for ProDevice MSS
- Page 1 INSTRUCTION MANUAL Rack drawer for media storage ProDevice MSS V.MSS.2024.2.EN Manufactured by: DISKUS Polska Sp. z o. o., ul. Kościuszki 1, 32-020 Wieliczka...
-
Page 2: Table Of Contents
Instruction manual ProDevice MSS CONTENTS 1. Features 2. Packaging removal 3. Overview 4. Operation 5. Storage of media 6. Maintenance www.pro-device.com... - Page 3 (magnetic tapes, disks, floppy disks, etc.). Available in the 3U and 4U versions, and with an extraordinary high storage capacity, the MSS drawers can be mounted in any 19” rack due to standard dimensions and universal rails.
-
Page 4: Features
Pendrive with manual instructions 2. PACKAGING REMOVAL The MSS drawer is delivered to the buyer in a dedicated box. The device’s weight requires at least two people to remove it from the box and subsequent transport to the place of installation. -
Page 5: Overview
Instruction manual ProDevice MSS 3. OVERVIEW Isometric view 1. Drawer pull-out handle 4. Top cover 2. Supermicro MCP-290-00053-0N rails 5. Front Professional / Ultimate 3. Top cover pull-out handle 6. Front Basic www.pro-device.com... - Page 6 Instruction manual ProDevice MSS Technical specification Model MSS 300 Basic MSS 300 Pro. / Ultimate Height External dimensions 131 x 450 x 750 mm 131 x 450 x 765 mm Capacity 32,5 l 32,5 l Weight 22 kg 23 kg...
-
Page 7: Operation
Instruction manual ProDevice MSS 4. OPERATION The MSS drawer has been designed for installation in 19-inch cabinets and racks with a minimum depth of 1000 mm. Before starting the installation, make sure that there is free space in the cabinet for the planned drawer. - Page 8 Instruction manual ProDevice MSS Mounting the drawer in the rack cabinet Unfold the rails attached to the device and slide out the inner part using the locking mechanism shown in the picture beside. Then, secure the rails to the rack mounting rails using the built-in latches.
- Page 9 Instruction manual ProDevice MSS Mounting the cable guide (in versions Professional and Ultimate) Screw the frame mounting piece into the holes previously installed right Supermicro MCP-290-00053-0N rail using M5 screws. Then, attach the drawer mounting piece to the holes in the drawer body using M4 screws.
-
Page 10: Storage Of Media
Instruction manual ProDevice MSS 5. STORAGE OF MEDIA If the rack cabinet is not permanently attached to the floor, place the MSS drawer at the lowest level possible. Each ProDevice MSS drawer must be loaded with evenly distributed components. Do not exceed a maximum load of 70 kg per drawer. - Page 11 INTERNATIONAL HOTLINE: +48 122 919 101 CONTACT ProDevice Spółka z ograniczoną odpowiedzialnością ul. Kościuszki 1, 32-020 Wieliczka, Poland tel. +48 122 919 101 e-mail: info@pro-device.com service: support@pro-device.com If you have an improvement idea or suggestion, write to info@pro-device.com info@pro-device.com www.pro-device.com MANUFACTURER'S ADDRESS DETAILS DISKUS Polska Spółka z ograniczoną...