Table of Contents
Advertisement
5. PROGRAMMING
5.5
Program Example for Use of the ACPU/QCPU (A mode) (dedicated
instructions)
*Setting of network parameters using RLPA dedicated instruction
*Setting of automatic refresh parameters using RRPA dedicated instruction
Downloaded from
ManualsNet.com
A sequence program is used to set the network and automatic refresh parameters.
(1) Program example
search engine
5-12
MELSEC-A
Synchronization mode:
invalid
Number of connected
modules:1
AJ65BT-64DAV station
information (remote device
station, 2 stations occupied,
station No.1)
Dedicated instruction
(RLPA)
Starting I/O number of
master module
Parameter storage
starting device
Device which turns on 1
scan at completion
Reads parameter status
at abnormal completion
Advertisement
Table of Contents
