Table of Contents
Advertisement
[Wiring Precautions]
When disconnecting the communication and power supply cables from the module, do not hold
and pull the cable part.
Disconnect the cables after loosening the screws in the portions connected to the module.
Pulling the cables connected to the module can damage the module and cables or can cause a
malfunction due to a cable connection fault.
[Starting and Maintenance Precautions]
• Do not touch the terminals while power is on. Doing so may cause malfunctioning.
• Be sure to shut off all phases of the external power supply used by the system before cleaning
or retightening the terminal screws.
Not doing so can cause the module to fail or malfunction.
• Do not disassemble or modify the modules.
Doing so could cause trouble, erroneous operation, injury, or fire.
Do not drop or apply strong shock to the module. Doing so may damage the module.
Be sure to shut off all phases of the external power supply used by the system before mounting
or dismounting the module to or from the panel.
Not doing so could result in damage to the product.
Do not install/remove the terminal block more than 50 times after the first use of the product.
(IEC 61131-2 compliant)
• Before touching the module, always touch grounded metal, etc. to discharge static electricity
from human body.
Failure to do so can cause the module to fail or malfunction.
[Disposal Precautions]
• When disposing of this product, treat it as industrial waste.
Downloaded from
ManualsNet.com
search engine
CAUTION
!
CAUTION
!
CAUTION
!
A - 3
Advertisement
Table of Contents
