Table of Contents
Advertisement
5. PROGRAMMING
*Initial settings
*1
*Changing of Initial settings
*Processing at initial settings
*Setting of digital values
*Analog output enable/disable specification
*1:The program enclosed by the dotted line is necessary only when the initial settings are changed.
Downloaded from
ManualsNet.com
Initial setting change
Digital
value
setting
search engine
5-17
MELSEC-A
Offset/gain value selection
(RY04)
Analog output enable/disable
setting (RWw4)
Writes to the master station
Turns on initial data procedure
completion flag (RY18)
Turns on initial data setting
request flag (RY19)
Offset/gain value selection
(RY04)
Analog output enable/
disable setting (RWw4)
Writes to the master station
Turns on initial data setting
request flag (RY19)
Turns off initial data procedure
completion flag (RY18)
Turns off initial data setting
request flag (RY19)
CH.1 digital value setting
(RWw0): 50
CH.2 digital value setting
(RWw1): 100
CH.3 digital value setting
(RWw2): 200
CH.4 digital value setting
(RWw3): 300
Turns on CH.1 analog output
enable/disable flag (RY00)
Turns on CH.2 analog output
enable/disable flag (RY01)
Turns on CH.3 analog output
enable/disable flag (RY02)
Turns on CH.4 analog output
enable/disable flag (RY03)
Advertisement
Table of Contents
