Toshiba B-FV4D-GL Series Owner's Manual page 8

1. PRODUCT OVERVIEW

When you need to purchase a power cord
In some countries/regions the power cord is not provided with this unit, if this is the case then please purchase
an approved one that meets the following standards or contact your authorised TOSHIBA TEC
CORPORATION representative.
Country/
Agency
Region
Australia SAA
Austria OVE
Belgium CEBEC
Canada CSA
Denmark DEMKO
Finland FEI
France UTE
1. For use with 100 – 125 Vac mains power supply, please select a power cord rated Min. 125V, 10A.
2. For use with 200 – 240 Vac mains power supply, please select a power cord rated Min. 250V.
3. Please select a power cord with the length of 2m or less.
4. The power cord plug connected to the AC power inlet must be able to be inserted into an ICE-320-C14 inlet. Refer to
the following figure for the shape.
Country/Region
Power Cord
Rated (Min.)
Type
Conductor size
(Min.)
Plug Configuration
(locally approved
type)
Rated (Min.)
*1: At least, 125% of the rated current of the product.
ENGLISH VERSION EO1-33099
Certification Country/
mark Region
Germany
Ireland
Italy
Japan
Netherlands
Norway
Spain
North America Europe
125V, 10A 250V
SVT H05VV-F
No. 3/18AWG 3 x 0.75 mm
125V, 10A 250V, 10A
Agency Certification mark
VDE
NSAI
IMQ
METI
KEMA
NEMKO
AEE
Power Cord Instruction
United
Kingdom
250V
H05VV-F
2
3 x 0.75 mm
250V, *1
E1- 2
(As of Oct. 2014)
Country/
Agency
Region
Sweden SEMKKO
Switzerland SEV
UK ASTA
UK BSI
U.S.A. UL
Europe HAR
China CCC
Australia
250V
AS3191 approved,
Light or Ordinary Duty type
2 2
3 x 0.75 mm
250V, *1
1.4 Accessories
Certification
mark
China
250V
GB5023
2
3 x 0.75 mm
250V, *1