1. PRODUCT OVERVIEW
1.5.5 Button and Indicator
Lamp
ENGLISH VERSION EO1-33099
The [FEED] button has three functions. It can operate as a FEED,
RESTART or PAUSE button depending on current the printer state.
As a FEED
button
As a RESTART
button
As a PAUSE
button
The indicator lamps (LED1 and LED 2) light up or flash in different
colors and sequences depending on the printer status. A quick guide to
lamp statuses and their meaning is shown inside the top cover.
LED 1
Unlit
Green
S
Green
Green
F
Green
Green
Orange
Orange
Orange
Red
Red
Red
Red
Red
Red
F:
Flashes fast (0.5 sec)
M:
Flashes at medium speed (1.0 sec)
S:
Flashes slowly (2.0 sec)
E1-
5
Pressing this button when the printer is online will cause
the media to feed forwards.
Pressing this button after removing the cause of an error
returns the printer to an online state.
Pressing this button with the printer is paused will resume
printing.
Pressing this button while the printer is printing will stop
the printing after completing the current label. The printer
is then paused.
LED 2
The power is off.
Unlit
The Top Cover is open if the printer
power is on.
Unlit
Stand-by
Printing is temporarily stopped
Unlit
(paused).
Unlit
Communicating with a host
Writing data to the flash or USB
Green
memory
The Flash ROM on the CPU board or
M
Green
USB memory is being initialized.
Green
A paper jam occurred.
Red
The media has ended.
The media has ended while the print
F
Red
data is being sent to the printer.
Top Cover (Thermal Head) open error.
M
Red
The Top Cover has been opened during
an operation.
The print head temperature exceeded
F
Orange
the upper limit.
A communication error occurred.
Green
(Only when the RS-232C is used.)
Green
S
Command error
Flash ROM on the CPU board error,
or USB memory error
An erase error while formatting the
Flash ROM on the CPU board or
M
Green
USB memory
Unable to save files due to
insufficient storage space on the
Flash ROM on the CPU board or
USB memory.
M
Orange
The print head is broken.
1.5 Appearance
Printer Status