To Recall Text From Memory; To Delete Text From Memory - Casio KL-100E User Manual

4. Press SET to store the text in memory or ESC
to abort the store procedure without storing
anything.
• If there is nothing in memory yet, your text is
automatically stored in Area 1. If Area 1 already
contains data, your new input is automatically
stored in Area 2.
• If there is not enough room for your text to fit in
memory, the message "FUL!" appears when you
press SET in step 4.

To recall text from memory

Example: To recall the contents of Area 2 while memory contains the following
text.
Area 1: ABCDEFG
Area 2: CASIO
1. While the input screen is on the display, press FUNCTION and then 1
(MEMO).
• Note that text recalled from memory will replace any text currently on the
display.
2. Press L a number of times to change to the
text recall prompt.
3. Press SET.
• If all of the text does not fit on the display, you
can use H and J to scroll it to the left and right.
4. Press L to change to Area 2.
• Use K and L to switch between Area 1 and
Area 2.
E-16
5. Press SET to recall the text from the area that
OK
• Note that recalling data from memory replaces
anything that is currently on the input display.
Memory text cannot be appended.

To delete text from memory

EFG
1. While the input screen is on the display, press FUNCTION and then 1
2. Press L a number of times to change to the
3. Press SET.
• If all of the text does not fit on the display, you
can use H and J to scroll it to the left and right.
4. Use K and L to select Area 1 or Area 2 then
CAL?
5. Press SET to delete the text from the area that is currently on the display.
ABCD
Area 1 text
CASI
Area 2 text
is currently on the display.
(MEMO).
text delete prompt.
press SET.
CASI
DEL?
ABCD
Area 1 text
OK?