Casio KL-100E User Manual page 21

Casio user's guide musical instrument kl-100e
Table of Contents

Advertisement

• • • • • Text Input
Cannot input text.
Possible Cause
FUNC key has been
Press ESC to clear FUNC key operation.
pressed.
Tape does not come out when PRINT is pressed.
Possible Causes
Back cover is not closed
Securely close the back cover.
completely.
No more tape left in the
Replace the tape cartridge with a new one.
cartridge.
Tape jam
Remove the tape cartridge and pull out the
jammed tape by hand. Cut off excess tape with
scissors, and carefully replace the cartridge into
the label printer.
Important!
Never allow the tape outlet to become blocked
and never touch tape as it is being fed during
printing.
Tape comes out when PRINT is pressed, but nothing is printed on it.
Possible Cause
Only blank spaces were
Input the text you want to print.
input.
Printing is blurred, blotched, broken, etc.
Possible Causes
Improper print density set-
Adjust the print density setting.
ting
Improper loading of the
Remove the tape cartridge and reload it cor-
cartridge
rectly.
Dirty print head or rubber
Clean the printer head and roller.
roller
E-20
Action
Action
Action
Action
Ink ribbon is being fed from the tape outlet along with the tape.
Possible Cause
Ink ribbon cassette loaded
Remove the ink ribbon cassette and check to
while the ink ribbon is
make sure the ink ribbon is not broken. Next,
slack.
take up any slack in the ink ribbon and then
reload the tape cartridge.
Important!
• Before loading an ink ribbon cassette into
• If the ink ribbon is broken, you must change
• • • • • Tape Cutting
Cannot cut tape.
Possible Cause
Tape cutter blade is dull.
Take the label printer to the dealer from whom
you purchased it to have the tape cutter blade
replaced.
Printed text is cut off by tape cut operation.
Possible Causes
The printer is set up for
Be sure to press the FEED key before perform-
manual tape feed.
ing the tape cut operation.
Important!
When the printer is set up for manual tape feed,
the tape is not fed automatically after printing
is complete.
Out of tape
Replace the tape cartridge with a new one.
Action
the label printer, always make sure you take
up any slack in the ink ribbon first.
to another ink ribbon cassette.
Action
Action

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents