Part Names - Sharp R-90GC Operation Manual

P A R T N A M E S
OVEN PARTS
3
14
5
1 4
1 Door handle
To open the door, pull the handle down
and forward. Never hold the door
handle when moving the oven.
2 Oven door with see-through window
3 Safety door latches
The oven will not operate unless the
door is securely closed.
4 Door hinges
5 Door seals and sealing surfaces
6 Turntable motor shaft
7 Removable turntable support
Carefully place the turntable support in
the center of the oven floor.
After cooking, always clean the turn-
table support, especially around the
rollers. These must be free from food
splashes and grease. Built-up splashes
or grease may overheat and cause
arcing, begin to smoke or catch fire.
INTERACTIVE DISPLAY
The Interactive Display spells out operating steps and shows cooking hints. When indicator above
CUSTOM HELP is lighted, touch CUSTOM HELP to read a specific hint which may assist you.
13
12
11
10
6
2 3
Each indicator shows what function is in progress.
9
8
7
15
8 Removable turntable
Place the turntable on the turntable
support securely. The turntable will
rotate clockwise or counterclockwise.
Only remove for cleaning.
9 Ventilation openings
10 Oven light
It will light when oven is operating or
door is open.
11 Waveguide cover: DO NOT REMOVE.
12 Auto-Touch control panel
13 Time display: 99 minutes, 99 seconds
14 Convection air openings
15 Removable low rack
16 Removable high rack
17 Splash guard
18 Ventilation cover: DO NOT REMOVE.
9
18
16 17