Table of Contents
Advertisement
Item
Display
Memory
SYMBOL
EFFECT
STYLE
M-FEED
MIRROR
MEMO
DENSITY
6 mm
Troubleshooting
• • • • • Power Supply
Nothing appears on the display.
Possible Causes
Low batteries
Replace batteries.
Batteries loaded incor-
Remove batteries and reload them correctly.
rectly
AC adaptor is not con-
Make sure the AC adaptor is connected cor-
nected correctly.
rectly.
• • • • • Text Input
Cannot input text.
Possible Cause
FUNCTION key has been
Press ESC to clear FUNCTION key operation.
pressed.
Reset
Cleared
Cleared
,
CANCEL
NORMAL
NO
OFF
STR?
3
OFF
Action
Action
Tape does not come out when PRINT is pressed.
Possible Causes
Back cover is not closed
Securely close the back cover.
completely.
No more tape left in the
Replace the tape cartridge with a new one.
cartridge.
Tape jam
Remove the tape cartridge and pull out the
jammed tape by hand. Cut off excess tape with
scissors, and carefully replace the cartridge into
the label printer.
Important!
Never allow the tape outlet to become blocked
and never touch tape as it is being fed during
printing.
Tape comes out when PRINT is pressed, but nothing is printed on it.
Possible Cause
Only blank spaces were
Input the text you want to print.
input.
Printing is blurred, blotched, broken, etc.
Possible Causes
Improper print density set-
Adjust the print density setting.
ting
Improper loading of the
Remove the tape cartridge and reload it cor-
cartridge
rectly.
Dirty print head or rubber
Clean the printer head and roller.
roller
Action
Action
Action
E-19
Hide quick links:
Advertisement
Table of Contents
