Enhancing Your System - Sharp DK-CL5P Operation Manual

■ NAP
The main unit will temporarily enters stand-by mode when pressing
NAP button. After nap time, main unit will power on into last function
used.
1 Playback the desired sound source.
2 Press the NAP button on the remote control repeatedly to
select nap time.
Note:
Selecting "oFF" during NAP setting will activate the last
function.
120 90
oFF 05
3 The unit will go to standby mode and NAP indicator ( )
appears on the display.
To confirm the remaining nap time:
1 While " " is indicated, press the NAP button once to display
"XXX".
"XXX" is NAP remaining time.
●
The remaining NAP time is displayed for about 3 seconds.
●
You can change the remaining NAP time while it is displayed
by pressing the NAP button (step 2).
To cancel the NAP operation:
Press the ON/STAND-BY button while " " is indicated.
60 30
10 20

Enhancing your system

The auxiliary cable is not included. Purchase a separate
auxiliary cable as shown below.
Portable audio player
Computer
To the line
output jack
Auxiliary cable
(not supplied)
DK-CL5P
VIDEO OUT AUDIO IN DC IN 8V
FM ANTENNA
25